Ikegami HQLM-1720WR, Руководство по эксплуатации

Страница: 13 / 82

HQLM-1720WR
- 3 -
(18) USB mouse control
By connecting a commercially available USB
mouse to the USB terminal of this monitor, it is
possible to perform various adjustments including
the “MENU setting,” “PRESET data setting,”
“Input signal switching,” and the “Front switch
setting” through the use of a mouse. Remote
operation of the monitor at a distant position is
possible by using a commercially available wire-
less mouse.
Use of the scroll wheel function of the mouse
will significantly improved the user-friendliness
of the monitor for making adjustment of various
data such as color temperature.
(19) UMD/IMD display with TSL protocol
This function is used to integrally control the
UMD/IMD display using "TSL UMD protocol
V3.1”.
Characters (alphanumeric) and TALLY can be
displayed.
V3.1 can centrally control up to 32 units per line
(system) using RS-485.
By increasing the number of lines, you can set
the IDs and perform individual control for up to
126 devices.
IMD
㸸
In Monitor Display
UMD
㸸
Under Monitor Display
(20) UMD/IMD display with user display
Sets a material name (alphanumeric) with up
to 8 characters to individual monitor for each in-
put and displays the preset material name with
the UMD/IMD display when the input channel is
switched.
When multi mode is used, the character display
can be displayed on four screens.
(21) Image & TEST signal MIX function
While the image is displayed, a "pluge signal of
-2%/0%/+2%"can be displayed at the same time in
the corner of the screen (small enough not to dis-
turb the image) so that you can check if there is
no "black sun" effect caused by the brightness
adjustment while looking at the image.
A "brightness signal of 100 to 109%" is also
displayed at the same time so that you can check
if the signal of 100% to 109% is not saturated
when it is input due to the contrast adjustment.
(22) Closed caption display
Decoding the closed caption signals (compatible
with CEA-608/CEA-708 standard) superimposed
to the HD-SDI signal and displaying on the screen
is available.
(23) Switching between HDR and color space by
payload
By the payload compatible with ITU-R BT.2077
and ITU-R BT.1120-9, switching of HDR and
switching of color space are conducted automati-
cally. In addition, if automatic following of the
signal is not desired, manual operation is also
available by the menu setting.