Ikegami FA-97A, Руководство по эксплуатации

Страница: 85 / 166

69
HDK-99 1803 VER1 (E)
4
O
P
E
R
AT
IO
N
4.6 Auto Setup
Auto Black Balance
Auto black balance can be activated from the camera, OCP, or MCP. This section explains how to activate from the camera.
1
Set the AWB/ABB switch to ABB.
The lens iris is automatically closed, and auto black
balance is now activated.
2
Check the result.
Upon completion of auto black balance, "OK" or "NG"
appears on the viewfinder screen.
CAUTION:
Be sure to set the R/G/B BLACK and MASTER
PEDESTAL control knobs on the OCP to the center
position before activating the auto black balance from
the camera. If the control knobs are not at the center
position, the control range may be biased.
Note:
To activate the auto black balance from an OCP, press
the ABB button on the panel.
To activate it from an MCP, press the ABB button
on the LCD or on the panel, depending on the MCP
model..
①
Set the AWB/ABB switch
to ABB.
ＡＢＢ
ＢＬＫ ＳＥＴ
ＡＢＢ
Ｏ Ｋ