IKEA SUPERBT, Руководство пользователя, Страница: 21 / 52

Problem Possible cause Solution
The compressor does not
start immediately pressing
the Shopping Function, or
changing the temperature.
This is normal, no error has
occurred.
The compressor starts a period
of time.
Water flows inside the re-
frigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Food products prevent
that water flows into the
water collector.
Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The Shopping Function
function is switched on.
Switch off Shopping Function
manually, or wait until the
function resets automatically
to set the temperature. Refer
to " Shopping Function func-
tion".
Temperature cannot be set. The FastFreeze function is
switched on.
Switch off FastFreeze manual-
ly, or wait until the function re-
sets automatically to set the
temperature. Refer to "Fast-
Freeze function".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the Mode pressed for
approximately 10 seconds un-
til a long sound is heard and
display shuts off for a short
time.
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The food products' tem-
perature is too high.
Let the food products temper-
ature decrease to room tem-
perature before storage.
ENGLISH 21