IKEA STARKVIND, Руководство пользователя

Страница: 5 / 92

5
IMPORTANT:
STARKVIND air purifier can be used as a standalone
device and also works together with TRÅDFRI
Gateway and the IKEA Home smart app.
QUICK GUIDE
If you have an IOS device:
Go to the App Store and download the IKEA Home
smart app. The app will take you through the
process of adding STARKVIND air purifier to your
TRÅDFRI Gateway.
If you have an Android device:
Go to Google Play and download the IKEA Home
smart app. The app will take you through the
process of adding STARKVIND air purifier to your
TRÅDFRI Gateway.
Pairing: Adding STARKVIND air purifier to your
TRÅDFRI Gateway.
STARKVIND air purifier E2007:
You will find the pairing button by removing the
front cover.
• The range between the gateway and the receiver
are measured in open air.
• Different building materials and placement of the
units can affect the wireless connectivity range.
• If the app can't connect your air purifier to the
gateway, then try to move the air purifier closer to
your gateway.
Fan speed control
The fan speed can be regulated between 1 to 5 and
Auto mode.
Auto mode
In Auto mode, the product selects the fan speed in
accordance with the ambient air quality.
The air quality sensor is active and measures PM 2.5
particles when the air purifier is running.
Only in the IKEA Home smart app.
Indicators for air quality (PM 2.5):
Green: 0-35 / Good
Amber: 36-85 / OK
Red: 86- / Not good
• Operational temperature: 0°C to 40°C.
• Humidity when operational: 10 to 60% RH
(Recommended operational humidity: 40-60% RH)
When STARKVIND air purifier is connected to the
mains for the first time, the LED lights on the
control panel light up in succession. When the LED
lights stop illuminating, the product is ready to use.
Press the control knob to put it in Auto mode, or
turn to the desired level. Press the knob again to
turn it off.
A long press activates the Control lock. It can also
be controlled from the app IKEA Home smart.
Care instructions
Unplug the product before cleaning.
To clean the product, wipe with a soft damp cloth.
Use another soft dry cloth to wipe dry.
Vacuum clean the pre-filter regularly.
Note!
Never use abrasive cleaners or chemical solvents
since these can damage the product.
Cleaning the air quality sensor
Vacuum clean the air quality sensor regularly.
Filter replacement
When replacing the filter, it is essential that the user
proceeds as follows:
One LED light illuminated on the control panel
indicates that you should check your filters.
AUTO
1
2
3
4
5
Warning!
The power supply cord must be disconnected
during filter replacement!
1. Disconnect the power and wait until the fan has
stopped.
2. Remove the pre-filter and clean the pre-filter with
a vacuum cleaner or with water depending on
how dirty it is.
3. Remove filter(s), and handle used filters carefully.
Dispose of the filter(s) in accordance with local
environmental regulations for waste disposal.
4. Clean the inside, removing all dust and dirt.
5. Insert the new filter(s). (Touch only the frame of
the gas filter).