7
8.
Using a hex-head socket wrench, remove the four
⁵⁄₁₆
"
hex-head hinge screws from the bottom hinge and pull the
hinge from the bottom of the refrigerator door.
Reverse Doors (optional)
IMPORTANT:
If you want to reverse your doors so that they
open in the opposite direction, follow these steps. If you are
not reversing the doors, see “Replace Doors and Hinges.”
Graphics follow these instructions.
Reverse Center Hinge
1.
Remove the three dome caps and screws from the handle
side and use them to fill the holes created when the hinge
screws were removed.
2.
Using the three
⁵⁄₁₆
" hex-head hinge screws, removed in
Step 1
,
insert two screws halfway into the holes, leaving
space to insert the Center Hinge.
3.
Once the refrigerator door is in place, slide the center hinge
from the right onto the screws, insert the third screw, and then
tighten all screws completely.
NOTE:
Make sure the washers are in place on both the top
and bottom pins of the center hinge.
Reverse Freezer Door
1.
Remove the three cabinet hole plugs from the top of the
cabinet and place them in the hinge holes on the opposite
side.
2.
Remove the door stop from the bottom of the freezer door.
3.
Move the door stop to the opposite side, making sure that the
hole in the door stop plate is aligned perfectly with the hole for
the center hinge pin.
4.
Using the screw removed in Step 2, fasten the door stop to
the bottom of the freezer door.
5.
Set aside the freezer door until the hinges and refrigerator
door are in place.
A. Dome cap washers
B. Hex-head hinge screws
C. Dome caps
Door Stop Screw
Door Hinge Hole Plug
Cabinet Hinge Hole Plug
Dome Cap
Dome Cap Washer
A
B
C
A.
⁵⁄₁₆
" hex-head hinge screws
B. Washers
A. Door stop screw
B. Door stop
A. Door stop screw
A
A
B
A
B
A
A