14
3.
Remove the light bulb and replace it with an appliance bulb of
the same size and shape.
For the freezer compartment, to replace with an LED light
bulb, order part number W10574850 (2.0 watts).
NOTE:
Some LED replacement bulbs are not
recommended for wet/damp environments. The
refrigerator and freezer compartments are considered to
be wet/damp environments. If using a brand of LED bulb
other than the recommended LED bulb, before
installation, read and follow all instructions on the LED
packaging.
If an incandescent bulb is used to replace an LED bulb,
use only incandescent bulbs for household appliances
with a maximum of 25 watts.
4.
Replace the light shield.
5.
Plug in refrigerator or reconnect power.
Vacation and Moving Care
Vacations
If You Choose to Leave the Refrigerator On While You’re
Away:
1.
Use up any perishables and freeze other items.
2.
If your refrigerator has an automatic ice maker, and is
connected to the household water supply, turn off the water
supply to the refrigerator. Property damage can occur if the
water supply is not turned off.
3.
If you have an automatic ice maker, turn off the ice maker.
NOTE:
Raise the wire shut-off arm to off (up) position.
4.
Empty the ice bin.
If You Choose to Turn Off the Refrigerator Before You
Leave:
1.
Remove all food from the refrigerator.
2.
If your refrigerator has an automatic ice maker:
Turn off the water supply to the ice maker at least one day
ahead of time.
When the last load of ice drops, raise the wire shut-off arm
to the Off (up) position.
3.
Turn off the Temperature controls. See “Using the Controls.”
4.
Clean refrigerator, wipe it, and dry well.
5.
Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odor and
mold from building up.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1.
If your refrigerator has an automatic ice maker:
Turn off the water supply to the ice maker at least one day
ahead of time.
Disconnect the water line from the back of the refrigerator.
When the last load of ice drops, raise the wire shut-off arm
to the Off (up) position.
2.
Remove all food from the refrigerator and pack all frozen food
in dry ice.
3.
Empty the ice bin.
4.
Turn off the Temperature controls. See “Using the Controls.”
5.
Unplug refrigerator.
6.
Clean, wipe, and dry thoroughly.
7.
Take out all removable parts, wrap them well, and tape them
together so they don’t shift and rattle during the move.
8.
Depending on the model, raise the front of the refrigerator so it
rolls more easily OR raise the leveling screws so they don't
scrape the floor. See “Adjust the Doors” or “Door Closing
and Door Alignment.”
9.
Tape the doors closed and tape the power cord to the back of
the refrigerator.
When you get to your new home, put everything back and refer to
the “Installation Instructions” section for preparation instructions.
Also, if your refrigerator has an automatic ice maker, remember to
reconnect the water supply to the refrigerator.