IKEA frostkall, Руководство пользователя, Страница: 11 / 32

After selection of the fridge or
freezer compartment the
animation starts
After selection of the
temperature the animation
flashes for a few minutes.
Bar indicators
The bars guide the user when interacting
with the unit and indicate at what level the
unit is performing. The bars indicate:
• which compartment is in focus (active),
when animation stops
• the desired temperature on the scale
• whether the set temperature is higher or
lower than the previous one (increasing
or decreasing animation).
Switching on
Connect the mains plug to the power socket
1. Press the ON/OFF if the display is off.
The temperature indicators show the set
default temperature.
2. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "High
temperature alarm".
If "DEMO" appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting...".
To select a different set
temperature refer to
"Temperature regulation".
Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from the
power socket.
Switching on the fridge
To switch on the fridge press the fridge
compartment button.
The fridge OFF indicator goes off.
To select a different set
temperature refer to
"Temperature regulation".
Switching off the fridge
To switch off the fridge press the fridge
compartment button for few seconds.
The fridge OFF indicator is shown.
Temperature regulation
1. Select the fridge or freezer
compartment.
2. Press the temperature button to set the
temperature.
3. Set default temperature: +4°C for the
fridge and -18°C for the freezer.
The set temperature will be reached
within 24 hours.
The temperature indicators show the set
temperature.
After power failure the set
temperature remains stored.
High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure or opening of the
door) is indicated by:
• flashing the alarm and freezer
temperature indicators;
• sounding of buzzer.
To reset the alarm press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then show again the set
temperature.
The alarm indicator continues to flash until
the normal conditions are restored.
ENGLISH 11