IKEA BITANDE, Руководство пользователя, Страница: 14 / 76

Problem Possible cause Solution
The room temperature is too
high.
Decrease the room tempera-
ture.
Water flows on the rear
plate of the refrigera-
tor.
During the automatic defrost-
ing process, frost defrosts on
the rear plate.
This is correct.
Water flows into the re-
frigerator.
The water outlet is clogged. Clean the water outlet.
Products prevent that water
flows into the water collector.
Make sure that products do
not touch the rear plate.
Water flows on the
ground.
The melting water outlet does
not flow in the evaporative
tray above the compressor.
Attach the melting water outlet
to the evaporative tray.
The temperature in the
appliance is too low/
high.
The temperature regulator is
not set correctly.
Set a higher/lower tempera-
ture.
If your appliance is still not working proper-
ly after making the above checks, contact
the After Sales Centre. You can find the list
at the end of this manual.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the light-
ing device. Contact your Service Center.
Closing the door
1. Clean the door gaskets.
2. If necessary, replace the defective door
gaskets. Contact the After Sales Service.
Technical data
Dimensions of Instal-
lation
Height 1780 mm
Width 560 mm
Depth 550 mm
Net Volume
Fridge 210 Litre
Freezer 58 Litre
Defrost System
Fridge auto
Freezer auto
Star Rating
Rising Time
21 hours
Freezing Capacity 4 kg/24h
Energy Consumption 0,846 kWh/24h
Noise Level 40 dB (A)
Energy Class A+
Voltage 230–240
Frequency 50 Hz
ENGLISH 14