Permanent Extra
Rinse
With this option you can permanently have an extra rinse when
you set a new programme.
To activate/deactivate this option, hold the button
pressed
for 3 seconds until the indicator comes on/goes off on the
display.
When it is activated, the appliance will default to this option after
you switch it off or change/reset the programme.
This option increases the programme duration.
10
Spin and addi‐
tional options
touch button
When you set a programme, the appliance automatically sets the
maximum spin speed allowed, except for programme Denim.
With this option you can decrease the default spin speed.
Touch repeatedly this button to:
• Decrease the spin speed. The display shows only the spin
speeds available for the set programme.
• Additional spin options No Spin
.
Set this option to deactivate all spin phases. The appliance
performs the only draining phase of the selected washing
programme. Set this option for very delicate fabrics. The rin‐
ses phase uses more water for some washing programmes
• Activate the Rinse Hold
option.
The final spin is not performed. The water of the last rinse is
not drained out to prevent the fabrics from creasing. The
washing programme ends with water in the drum.
The indicator
is on display. The door stays locked and the
drum turns regularly to reduce creasing. You must drain the
water to unlock the door.
If you touch the button
, the appliance performs the spin‐
ning phase and drains the water.
The appliance empties the water out automatically
after 18 hours approximately.
11
Temperature
touch button
When you select a washing programme, the appliance automati‐
cally proposes a default temperature. With this option you can
change the temperature.
The indicator of the set temperature comes on.
The indicator
= cold water.
12
Mode touch but‐
ton
Thanks to this button, a cycle can perform:
• Only washing:
indicator is on (default mode).
• Washing and drying:
and
indicators are on.
• Only drying:
indicator is on.
ENGLISH
17