IKEA 503.660.68, Руководство пользователя, Страница: 27 / 36

ENGLISH 27
Problem Possible causes: Solutions:
The control panel is switched
off, the appliance does not
work.
The appliance may be
in On/Stand-by mode.
There may be an
appliance power supply
problem.
Turn the appliance on
pressing the On/Stand-by
button. Check that:
- there is not a power outage
- the plug is properly inserted
in the power socket and the
mains double-pole switch
(if present) is in the correct
position (i.e. allows the
appliance to be powered)
- the household electrical
system protection devices
are efficient
- the power cable is not
broken.
The internal light does not
work.
The light may need
replacing.
The appliance may be
in On/Stand-by mode
- Models with LED lights:
contact the authorised
Technical Assistance Service.
- Turn the appliance on
pressing the On/Stand-by
button
The temperature inside the
compartments is not cold
enough.
There could be various
causes (see “Solutions“)
Check that:
- the door close properly
- the appliance is not installed
near a heat source
- the set temperature is
adequate
- the circulation of air through
the ventilation grilles on the
base of the appliance is not
obstructed.
There is water on the bottom of
the refrigerator compartment.
The defrost water drain
is obstructed.
Clean the defrosting
water drain (see section
“Maintaining and cleaning
the appliance“)
The red
F
icon is flashing and
a sound signal is activated
Door open alarm
It is activated when the
door remains open for
a prolonged period of
time.
To turn the sound signal off,
close the door of the product.
The red
F
icon will light up, a
sound signal is activated and
the letter “F“ is flashing on the
display.
Malfunction alarm
The alarm indicates
the malfunction of a
technical component.
Call the authorized Technical
Assistance Service. To turn the
sound signal off, briefly press
the “Turn off sound alarm“
button
Note:
it is normal for the refrigeration system to produce some noises, such as gurgling and hissing.
What to do if...