IKEA 105.178.80, Руководство пользователя

Страница: 5 / 8

ENGLISH
Product description
1
2
3
4
5
6
1 Upper chimney
2 Lower chimney
3 Hood body
4 Lighting
5 Grease filter
6 Control panel
Control panel
A
Speed
Turns the motor on/off at speed one.
Deactivates each speed.
B
Speed
Turns the motor on at speed two / Activates the car-
bon filter alarm.
Press and hold the button for approximately 2
seconds, with all the loads turned off (Motor+Lights),
to turn the activated carbon filter alarm on. LED (A)
flashes twice to confirm.
To turn off the alarm, press the button again and
hold it down for at least 2 seconds. The correspond-
ing LED flashes once (A). Only for the recirculation
mode.
C
Speed
Runs the motor at speed three / Resets the grease fil-
ter and carbon filter saturation alarm.
Press and hold the button for approximately 2
seconds, with all the loads turned off (Motor+Lights),
to reset the grease and carbon filter saturation alarm.
LED (A) flashes three times.
D
Speed
Turns the motor on at Booster speed.
This speed is timed for 6 minutes. At the end of this
time, the system returns automatically to the speed
that was set before. If it is activated with the motor
turned off, it will switch to OFF at the end of the
time. To deactivate it, press button D or press button
A.
E
Light
Press briefly: Turns the lighting system on and off at
maximum intensity.
Press and hold to change the lighting intensity up or
down.
Filters alarm
When the filter alarm is activated, the
following messages appear depending on the
circumstances:
Grease filter cleaning required alarm: button
“A” flashes once per second.
Odour filter cleaning required alarm: button
“A” flashes twice per second.
Once the filters have been regenerated reset
the alarm signal.
5