Chapter 2 Installation & Connection
Before Installation
For easy and quick installation and connection, it is strongly recommended that the user read and follow the following
instruction carefully so as not to damage the system accidentally by incorrect operation.
Safety Installation Instructions
When installing telephone wires, basic safety precautions should always be followed to reduce the risk of fire, electric
shock and injury to persons. Including the following:
1). Never install telephone wires during a lighting storm.
2). Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3). Never touch UN-insulated telephone wires or terminals unless the telephone line has been disconnected at the
network interface.
4). Use caution when installing or modifying telephone lines.
Installation precautions
This set is exclusively made for wall mounting or set on desk. Avoid installing in the following places (Doing so may
result in malfunction, noise, or discoloration).
1). In direct sunlight, hot, cold, or humid places. (Temperature range: 0 C-40 C / 32F-104F)
2). Places in which shocks or vibrations are frequent or strong.
3). Dusty places, or places where water or oil may come into contact with the unit.
4). Near high-frequency generating devices such as sewing machines or electric welders.
5). On or near computers, telexes, or other office equipment, as well as microwave ovens or air conditioners ( It is
preferable not to install in the same room with the above equipment).
6). Install at least 6 feet from radios and televisions.
7). Do not obstruct area around the main unit (for reasons of maintenance and inspection be especially careful to allow
space for cooling above and at the sides of the main unit).
Power Failure
In the event of power fialure, CO.1 to CO.4 will be connected to EXT.801--804 automatically. But CO.5 & CO.6 can`t be
used for 6 CO line unit.
Before Installation
Call ID
FSK/DTMF compatible Caller ID function is successfully equipped on TC-2000 system. The steps are as below:
1). Go to your telecom office applying the Caller ID service.
2).
3). An incoming call number will be displayed on the phone with Caller ID function. But the number will disapper when
you transfer the call to another extension.
4). For some area the Caller ID function is invalid because of the Telecom Singal of the area.
Extension 801-808 can realize the caller ID function.
