Ikco SAMAND, Руководство по обслуживанию, Страница: 20 / 40

23 Adjustment and replacement
W710R005
W710R006
2
3
4 4
W710R007
2,4
Compressor air gap
To measure
1 Measure the air gap between the drive plate
and the pulley.
Measure in at least 3 places.
The air gap should be 0,4 - 0,8mm.
Adjustment
2 If the air gap is incorrect, remove drive plate
retaining nut.
3 Release drive plate and collect washers and
key.
4 Adjust the air gap by changing:
a. Thickness of the washers.
b. The number of washers.
To fit
1 Refit the drive plate.
2 Fit the old nut and tighten to 3,5-4 mdaN.
3 Check and adjust the air gap if required.
4 Fit a new nut in place of the old one and
tighten to 3,5-4 mdaN.