12
06 — ROASTING: PRE-HEATING
The IKAWA Pro App will show that the roaster is pre-heating by
displaying the current temperature in the roaster.
If you want to cancel the pre-heat mode, press the top button on the
roaster. The roaster will start to cool-down (see following pages).
Once the roaster has heated to the starting temperature, the status
light on the roaster blinks red.
If the roaster temperature does not reach and stabilise at the
profile starting temperature, or the user does not press the top
button after three minutes, the roaster will automatically switch into
cool down mode and the status light will flash blue.
If the roaster is cold and/or profile starting temperature is high and/
or the profile starting fan speed is high the roaster may not reach
and stabilise at the starting temperature within two minutes. If this
happens try pre-heating the roaster again after the cool down mode
has finished.
Status light
Top button
