Tail Propeller Replacement
Weight Installation
To replace the tail rotor, please
switch OFF the helicopter fi rst.
Then slowly pull off the tail pro-
peller away from the rear mo-
tor. And then carefully install a
new propeller onto the rear mo-
tor shaft.
FOR NORMAL MODE
FOR NORMAL MODE
(Intermediate)
FOR HOVER MODE (Novice)
To modify the fl ight mode of
To modify the fl ight mode of
the helicopter, simply attach
the provided weight sticker to
the bottom of the helicopter
the bottom of the helicopter
as shown. Changing position
of the weight sticker will effect
the fl ight mode.
Weight
Weight
Warning and safety instructions
Choose a place which will meet the following condition:
-
Space area – it is recommended to have space area of more than 10ft(W) x 16.5ft(L) x 8ft(H).
-
Indoor environment with calm air condition. Beware of the air circulation from the air-condition.
-
Safety area – it is recommended that there is no electrical fan, air conditioner, reading lamp or
any other dangerous objects in the fl ying area.
Caution during Operation:
-
Do not operate the helicopter under the direct sun or strong lighting; it will affect the control
system of your helicopter.
-
Do not cover the lens of the transmitter. No signal will be released while your transmitter lens
is covered.
-
Do not stick any other label onto the helicopter – it will affect receiving of infrared signal.
