Ikan TRD Beholder MS1, Руководство пользователя

Страница: 6 / 9

How to Use
A: To start the stabilizer with the camera and gimbal level on a flat
surface at 90 degrees and then press the power button.
Note: Starting the stabilizer in a
position other than 90 degrees will
result in performance issues.
B . Joystick mode selection.
a. Press once for Lock Mode this mode will make the
stabilizer hold a position.
b. Press again to change to Follow Mode which will
make the stabilizer follow the pan and tilt of your
hand.
5
©
2015 Beholder All Rights Reserved
Installation for small cameras
Camera less than 400g such as Sony NEX5R and BMPCC will need an
adapter plate. The adapter plate will allow cameras that cannot mount
properly to be mounted on the gimbal.
Installation steps:
1. Put the adapter plate on the camera,
then tighten the screw.
2. According to your camera select an
appropriate mounting position.
3.Check the position of the adapter plate,
ensure the camera does not come in
contact with the gimbal.