www.ikancorp.com | 1.713.272.8822 | [email protected]
because we’re
filmmakers
too
General Information
Thank you for buying the Ikan Onyx Digital Color RGBWA LED Light. This fixture has been designed to perform reliably for years when the guidelines in this
booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit. These
instructions contain important information regarding safety during use and maintenance.
Every fixture has been thoroughly tested. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to
be damaged, carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact. In the event damage has
been found or parts are missing, please contact our customer support team for further instructions. Please do not return this unit to your dealer without
first contacting customer support at the number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.
Safety Instructions
This fixture is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow the guidelines in this
manual. The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the
information printed in this manual.
This device falls under PROTECTION CLASS 1. It’s essential this device be grounded properly. Only qualified personnel should perform all electrical
connections.
*WARNING*
INDOOR USE ONLY!
DO NOT EXPOSE FIXTURE TO RAIN AND MOISTURE!
DO NOT PLUG FIXTURE INTO A DIMMER PACK!
NEVER OPEN THIS FIXTURE WHILE IN USE!
*WARNING*
For proper operation, follow the Installation guidelines described in this manual. Only qualified and certified personnel should perform installation of
this fixture and only the original rigging parts (yoke) included with this fixture should be used for installation. Any modifications will void the original
manufacturer’s warranty and increase the risk of damage and/or personal injury.
Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may induce blindness.
Always disconnect from main power source before performing any type of service and/or cleaning procedure. Only handle the power supply by the plug
end, never pull out the plug by tugging the wire portion of the cord.
Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power cord is damaged, replace it immediately with a
new one of similar power rating.
