www.ikancorp.com | 1.713.272.8822 | [email protected]
because we’re
filmmakers
too
Instructions & Safety Precautions
1. Before connecting the fixture to the main power, set lights. Disconnect from main power before moving the fixture. Do not
pull the main connecting wire from power source. Any product repairs must be performed by professional ikan personnel.
Users must use correct wattage globes for fixture.
2. Before lighting fixture lights, main power connection must be stable and operating correctly.
3. When adjusting or replacing the lamp, the fixture must be disconnected from main power.
4. When connecting to the AC connection you must first shut down the electronic ballast. To avoid possible harm caused by
the fixture’s ballast, we recommend using Lightstar cables and connectors with the correct fixtures.
5. Electronic ballasts and DIN meet DIN EN605981 EN60065 safety standards.
6. Grid voltage should not exceed the “technical indicators” set forth in the manual. Prior to the use of electronic ballasts,
electronic check voltage network and cable wiring is correct. When AC voltage is less than prescribed values then the use
of the unit ma be prohibited for users and production.
7. Fixture lamp ambient operating temperature must ensure that 20°C (68°F) ~ + between.
8. Products must be placed on a solid, flat and dry surface. Surface temperature should be less than 50°C (120°F). Avoid
direct sunlight by then irradiated, and at high humidity and with explosive gas in the work environment.
Product Overview
Lightstar 575W Super Spot HMI Lighting Fixture
The Lightstar Super Spot is intended for professional studio and location use and may be operated by qualified personal only.
Please read the following instructions carefully before using the fixture for the first time. For the safety of all parties please
follow all instructions of lamp and ballast manufactures also. Please keep the operating instructions for future use.
The Lightstar 575W Super Spot combine the fixture and ballast in a simple attached unit. The ballast attaches directly to the
yoke of the light. The quick connection of the light to the ballast is simple with the 4 foot head cable that comes with the 575W
Super Spot kit.
Lightstar 575 Super Spot fixture has the following advantages:
1. The ballast power supply unit safely connects to the light fixture so the system is convenient and placement quick.
2. The Par Lens System gives the user a Spot, Flood, Narrow Flood, Super Flood, and Frost Lens to choose from.
3. The light’s body structure is more compact, smaller, and efficient.
4. The ballast can be attached directly on the yoke of light. This makes the attachment of the head to ballast cable very
convenient.
5. On the integrated ballast pack the dimming can be set from 50%-100%.
Ikan is the exclusive distributor of Lightstar products in the United States.
