www.ikancorp.com | 1.713.272.8822 | [email protected]
because we’re
filmmakers
too
Internal Care Instructions
Please clean the reflector and lens regularly with a customary glass cleaning agent. Please check that the reflector shows no kind of corrosion or damage.
Keep the contact surfaces of the electrical connections and lamp holder clean.
Lightstar Disclaimer
The manufacturer disclaims liability for any damage to persons or property caused by inappropriate or misuse of the fixture. Damage of this kind is
responsibility of the operator.
Optional Accessories
Some other products that work well include:
ROLLR-STND10
SW-04
KCP-703
2-Stage Roller Stand 10ft 6 in
Safety Wire
Stage Clamp with 16mm Stud
LSKT Kit Specs
Shipping Dimensions
36 x 16 x 16 in.
Shipping Weight
44.8 lbs
Inserting Accessories
Inserting and exchanging accessories must be carried out from a stable position. On the LSW-010, lift the top latch and turn it by 90° to the left. On the
LSW-001 and LSW-002 press the pin on the side of the holding bracket to release the spring. Insert accessories e.g. barn door, or scrim into the bracket.
Lift the top latch and turn it back into original position. Make sure the accessories are securely locked.
WARNING! Do NOT operate the fixture with closed barn doors! The risk of overheating can occur.
