www.ikancorp.com | 1.713.272.8822 | [email protected]
because we’re
filmmakers
too
What’s in the Box
Please carry and place the packaging box carefully. Check the lighting equipment and accessories upon opening the box. Please contact us if
anything is damaged or missing. Please save the packing materials for replacing and repairing the products in the future.
Installation & Power Supply
Ensure power is off before installation.
Place the light on the Ikan customized stands, release the tension knob on the 5/8” receiver, adjust the light in the desired direction, and then
tighten the tension knob on the 5/8” receiver.
Illuminate light by pressing the power switch. On the default screen, a voltage (ex. 13.8V) at the upper right corner indicates the current internal
DC Voltage.
Adjustable Knob
The knob is used to adjust the dual-color LED light’s illumination in normal operation. Adjustment range of illumination is 0%-100%. In the menu
setting status, the knob is used for parameter settings.
Notice & Maintenance
1. The LEDLITE-300-DMX working temperature range must be regulated. Overheating and under-cooling will reduce the LED working life.
2. Products must be placed on a stable, dry, flat surface. Avoid exposure to sunlight and operating in an environment with high humidity or
explosive gas.
3. Don’t cover the fan vent. It will shorten the working life of the fixture.
4. Don’t beat, knock or shake the lighting equipment during the operation.
5. If the LEDLITE-300-DMX isn’t working normally, please contact the Ikan repair department. Please don’t disassemble/re-assemble by
yourself.
Failure
Failure Cause
Troubleshooting
Unit Won’t Turn On
The power is connected incorrectly or
the power switch is not turned on
The power is connected incorrectly,
press the power switch on
Turn off Light with shortcut button
Turn on the light with the button B
During the operation lamp is out
Overheat protection was initiated by
long time or environment temperature
Turn off the power and restart lamp
again when temperature is lower
Diodes or circuit damage
Contact Ikan for repairing or replacing
the diodes
Overheat protection was initiated by fan
failure
Contact Ikan for repairing or replacing
the fan
Fixture Size
22.2 x 14.3 x 12.1 in.
Fixture Weight
12 lbs
