IKA WERKE ULTRA-TURRAX Tube Drive, Руководство по эксплуатации

Страница: 11 / 35

Cancelling the countdown
- Button “Start/Stop ”(C)
Switching off
- Button “Power” (A)
It is possible for the media to become jammed between the cutters.
The unit will automatically change the direction of rotation of the cutting
device up to three times in an attempt to free the cutters. The unit will
switch off automatically if this is not possible.
If the device becomes blocked on three occasions within a certain
period of time the following error message will occur:
Ô
Display
Ô
An audible signal will be given
Correktive action: Switch off the device, check contents, switch on the
device.
• ST-20 Mixing vessel
• ST-20 γ -sterilized Mixing vessel, sterilized
• DT-20 Dispersing vessel
• DT-20
γ
-sterilized Dispersing vessel, sterilized
• BMT-20 S Mixing vessel with balls of stainless steel
• BMT-20 S γ -sterilized Mixing vessel with balls of stainless steel,
sterilized
• BMT-20 G Mixing vessel with balls of glass
• BMT-20 G
γ
-sterilized Mixing vessel with balls of glass,
sterilized
The appliance is maintenance-free.
For cleaning disconnect the main plug.
Only use cleansing agents which have been recommended by IKA
Use to remove:
Dyes
isopropyl alcohol
Construction materials water containing tenside/ isopropyl alcohol
Cosmetics
water containing tenside/ isopropyl alcohol
Foodstuffs water containing tenside
Fuels water containing tenside
- Do not allow moisture to get into the appliance when cleaning
- Wear protective gloves during cleaning the devices.
- Before using another than the recommended method for clean-
ing or decontamination, the user must ascertain with IKA that
this method does not destroy the instrument.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part,
see www.ika.de .
Repair
In case of repair the device has to be cleaned and free from any
materials which may constitute a health hazard.
If you require servicing, return the appliance in its original packa-
ging. Storage packaging is not sufficient. Please also use suitable
transport packaging.
11
032007
Maintenance
Error message
Power
Start
Stop
E 3
Accessories