6
Assembly
H-Stands
Fig. A
Fig. B
4.1
4.2
3.1
3.2
3.3
5
1
4.2
5
1
8
4.2
7
6
2
H-feet
Screw the two side parts (4.1) to the bridge (4.2) (see fi-
gure A).
Screw the adjusting screw (3.1) with lock nut (3.2) into the
right-hand side part and put on the cap (3.3) (see Fig. B).
The three rubber feet must be glued under the stand legs,
which do not have an adjusting screw.
H-feet stand rod mounting
Degrease the conical surfaces, apply glue and drive the
stand rod (1) firmly into the bridge (4.2) (use a rubber
hammer or soft intermediate layer).
Put on the cap (5).
R 2723 telescopic stands
CAUTION
The telescopic tube must
not be directed at people.
Insert the stand rod (1) with the cone into the bridge (4.2)
(the knurled screw (Fig. 2.2) is on the side. Tighten the
screw (6) over the washer (7). The O-ring (8) is positioned
as a buffer over the bridge (4.2).
Put on the cap (5).
