IKA myPlate, Руководство пользователя

Страница: 5 / 12

5
/// Permissible medium / contaminants / side reactions
Danger!
› Only process media that will not react dangerously to the extra energy produced through
processing. This also applies to any extra energy produced in other ways, e.g. through light
irradiation.
Warning!
› Beware of hazards due to:
- glass breakage,
- incorrect container size,
- overfilling of media,
- unsafe condition of container.
› Process pathogenic materials only in closed vessels under a suitable fume hood.
› Please contact IKA if you have any questions.
› Please consider any possible contaminations and unwanted chemical reactions.
› It may be possible for wear debris from rotating accessory parts to reach the material being
processed.
› When using PTFE-coated magnetic bars, the following has to be noted: Chemical reactions
of PTFE occur in contact with molten or solute alkali metals and alkaline earth metals, as well
as with fine powders of metals in groups 2 and 3 of the periodic system at temperatures
above 300 °C – 400 °C. Only elementary fluorine, chlorotrifluoride and alkali metals attack it;
halogenated hydrocarbons have a reversible swelling effect.
(Source: Römpps Chemie-Lexikon and ”Ulmann”, Volume 19)
/// Procedures during sample runs
Warning!
› Wear your personal protective equipment in accordance with the hazard category of the
media to be processed. There may be a risk from:
- splashing and evaporation of liquids.
- ejection of parts.
- release of toxic or combustible gases.
› Reduce speed if:
- medium splashes out of vessel because the speed is too high,
- device is not running smoothly,
- container moves on the base plate,
- an error message is displayed.
Caution!
› Device surface is partially made of glass:
- Glass surface can be damaged by impact.
- If glass surface is damaged it could cause injury, don`t use the device anymore.
› Use only the AC adapter supplied.
› Set up the device in a spacious area on an even, stable, clean, non-slip, dry and fireproof surface.
› The base plate must be clean and undamaged.
› Check the device and accessories for damage before each use. Do not use damaged components.
/// Accessories
› Safe operation is guaranteed only with the use of original IKA accessories.
› Observe the operating instructions of the accessories.