IKA MICROSTAR 15 control, Руководство пользователя

Страница: 9 / 18

22 Operator panel and display
/// Explanation of symbols on the display
The symbols appear on the screen change depending on the status
and settings of the device. The following screen shows the most
significant symbols.
5 2 1 3 4 6 7
8
9
12
13
10
11
1
This symbol indicates all function keys except for the standby key (A) are locked.
2 This symbol indicates the operating mode.
3 This symbol appears when the temperature sensor is pluged in.
4 This symbol indicates the active vibration recognition and the set sensitivity level.
5 This symbol means the device is communicating via a USB cable.
6
This symbol means the device is connected to a computer and the stirrer is being
controlled via labworldsoft.
7
This symbol means the device is communicating with a Wireless Controller or a PC via Bluetooth.
The symbol no longer appears if no Bluetooth communication is being performed.
8 This symbol means the stirring function is activated and the device is running.
9 This symbol means the set value for the speed.
10
While the device is running, you can reset the current torque to 0 Ncm by toucihng the
timer key (D) and simultaneously pressing the rotary / push knob (G).
Touching the Counter / Timer key (F) switches between the torque and temperature display.
11
The symbol appears only when the temperature sensor is connected. The unit can be switched
between Fahrenheit degree (°F) and Celsius degree (°C) by touching timer key (D) when the
temperature sensor is connected.
12 This symbol means the timer function is activated.
13 This symbol means the counter function is activated.
Display
Operator panel and display 23