Operator panel and display
21
20 Speed
Operator panel and display
/// Operation
A
G
B
F
C
D
E
A
Standby key
Device switches on / enters standby
(no disconnection from the power supply network).
B
Lock key
Lock / unlock keys and knob.
C
Vibration monitoring
Activate / deactivate the internal vibration sensor.
Set individual levels (
I
/
II
/
III
).
D
Timer key
Activate the timer value adjusting function.
Switch between temperature unit °C and °F.
E
Display
Display information as settings.
F
“Counter / Timer” key
Select between “Counter” and “Timer”
(stirring function is not active).
With a temperature sensor inserted, the torque or
temperature display can be selected during operation.
G
Control knob
(rotating / pressing)
Set the speed by rotating.
Start / stop the stirrer function by pressing.
Set the timer by rotating.
Display
Overload status 1
The device is already running within the overload range, however, the actual
speed does not match the set speed. This condition is maintained as long as
neither the motor current nor the device temperature exceeds their permissible
limit value. In this overload status the torque value flashes.
Overload status 2
The device stop at a load above 130 % of the nominal torque.
Message in the display (see “Error codes” section).
/// Output shaft
Caution! ( )
Please see section “Safety instructions“!
The clamping chuck and output shaft permit clamping IKA recommend stirrer
tools (see section “Permitted IKA Stirrer tools“). The output shaft is designed
as a hollow shaft and the opening on the top side of the housing is closed
with a plastic cover. When the stirrer cover is opened, it is possible for stirring
shaft to be pushed out over the top edge of the housing at standstill, e.g.
during changing container.
For safety reason, the stirrer cover must be pushed back into the opening of
the housing so that it is properly closed. This is the only way to ensure that
working with the unit is safe and that media cannot enter the device.
Содержание MICROSTAR 15 control
Страница 1: ...MICROSTAR control...
