English
20
How to stream a processed signal
In order to stream a processed signal to your audience (e.g., an effected guitar or voice), follow these steps:
1. Set the iRig Stream Pro to operate in multichannel mode as described above.
2. If you are using an instrument like a guitar or a bass, connect it using a regular 1⁄4” guitar cable to the iRig
Stream Pro’s 1/4” instrument input and adjust the gain level. You can also use a microphone connected to
the XLR input and follow the same following steps.
3. Open a DAW or an App, on the connected host, that supports multitrack recording.
4. Create a mono track assigning Input 3, which corresponds to the Mic/Inst input. This is the track that will be
processed.
5. Insert an effect processor on this track and, if it is not on by default, activate the input monitoring. To activate
the input monitoring option on the track, please refer to the software documentation.
IMPORTANT: make sure that the App you’re using is set to run in Background, this allows you to use it while
you’re using other Apps (such as streaming Apps). To set the App to run in background please refer to the
software documentation.
