IK Multimedia iRig STOMP, Быстрый старт

Страница: 2 / 32

iRig STOMP
Thanks for purchasing iRig STOMP. This is a basic guide to
get you started. Your package contains:
• iRig STOMP
• 9V Battery
• 2 meters/6.5 feet 1/8” mini jack cable
• Quick Start Guide
• Registration Card
iRig STOMP is the first stompbox guitar interface for iPhone,
iPod touch and iPad. For the first time, guitar and bass
players can now integrate their favorite effects and signal
processing apps into their existing live pedalboard setup.
Register your iRig STOMP
By registering, you can access technical support, activate
your warranty and get free JamPoints™ added to your
account. JamPoints™ allows you to get discounts on future
IK purchases! Registering also keeps you current with
product news and update information.
Register at: www.ikmultimedia.com/registration
Getting Started
iRig STOMP can be used with your iPhone/iPod touch/iPad.
1. Insert the 9V battery into the battery slot on the bottom
panel of iRig STOMP and carefully connect the plug to
the battery.
2. Connect your iOS device to iRig STOMP using the
included mini jack cable.
3. Connect your guitar or bass to the instrument input on
iRig STOMP.
4. Connect your guitar amp to the Left line output of iRig
STOMP. If you have two amplifiers and want to create a
stereo setup, connect one amp to Left line out and the
other to Right line out.
5. If you are not using guitar amps and want to directly
connect to a P.A. system, connect it to the Left and Right
line outputs.
6. If you need to practice silently, connect your headphone
to iRig STOMP headphone output.
7. Download AmpliTube from the App Store
SM
.
8. Open AmpliTube, and go to the SETUP page, checking
the input level meter at the top of the page. Set the “IN”
slider on AmpliTube to “0” (center position), and adjust
the INPUT knob on iRig STOMP so that the input level
meter on AmpliTube occasionally peaks at maximum
level when you play harder. You can use the iOS device
VOLUME control buttons to adjust the output level of
iRig STOMP.
Use the iRig STOMP footswitch to enable or disable iRig
STOMP and the app processing.
ENGLISH