IK Multimedia irig pads, Руководство пользователя

Страница: 24 / 32

English
24
actually sent again when the Oct buttons are pressed and the octave is shifted.
• When done press pad 16 (ENTER) to confirm the selection and exit the EDIT mode.
10.2.5 Assign CC to Pushbuttons
To assign a CC message to a pushbutton:
• Enter EDIT mode.
• Press the pushbutton 1 or 2 depending on which one you want to assign the MIDI CC to.
• Pads 9, 10, 14 and 15 will illuminate.
• Press pad 10 (CC).
• Pads 5 (temp) and 6 (toggle) will illuminate RED.
• Press pad 5 or 6 depending if you want the note behavior to be temporary (temp) or latched (toggle).
Selected mode will quickly flash to confirm the selection.
• Compose the MIDI CC number using the 1-10 pads (10 means 0). At each press the pads will flash RED. In
case a wrong value is inserted EDIT pusbuttons will flash.
• When done press pad 16 (ENTER) to confirm the selection and exit the EDIT mode.
10.2.6 Assign PC to Pushbuttons
To assign a PC message to a pushbutton:
• Enter EDIT mode.
• Press the pushbutton 1 or 2 depending on which one you want to assign the MIDI PC to.
• Pads 9, 10, 14 and 15 will illuminate.
• Press pad 15 (PC).
• Compose the MIDI PC number using the 1-10 pads (10 means 0). At each press the pads will flash RED. In
case a wrong value is inserted EDIT pushbuttons will flash.
• When done press pad 16 (ENTER) to confirm the selection and exit the EDIT mode.
10.2.7 Assign MIDI CH to Pushbuttons
To assign a MIDI CH to a pushbutton:
• Enter EDIT mode.
• Press the pushbutton 1 or 2 depending on which one you want to assign the MIDI CH to.
• Pads 9, 10, 14 and 15 will illuminate.
• Press pad 14 (MIDI CH).
• All pads between 1 and 9 will light up GREEN.
• Compose the MIDI CH number using the 1-10 pads (10 means 0). At each press the pads will flash RED. In
case a wrong value is inserted EDIT pushbuttons will flash.
• Press pad 16 (ENTER) to confirm the selection and exit the EDIT mode.