IK Multimedia irig pads, Руководство пользователя

Страница: 17 / 32

English
17
7.2 Continuous Controls
In addition to the pads, iRig Pads can send MIDI CCs and MIDI CH from three rotary controls and one slider.
7.2.1 Knob 1, Knob 2
These are two knobs that send values from 0 to 127 on the programmed CC, approx 64 at center position.
These knobs can also be programmed to send MIDI CH.
7.2.2 Slider
This slider sends values from 0 to 127 (from lower to upper position) on the programmed CC, approx 64 at
center position. The Slider can also be programmed to send MIDI CH.
7.2.3 Data encoder
This endless encoder (24 steps) can work in two modes:
• ABSOLUTE (ABS)
• RELATIVE (REL)
When working in ABSOLUTE mode the endless encoder will send values from 0 to 127 on the selected CC (+1
increments per clockwise encoder steps and -1 decrements per counter-clockwise encoder steps).
Once values 0 or 127 are reached they will be continued to be sent if the encoder is rotated in the same
direction.
The starting value from which to send +1 or -1 values will always be the last one sent by the encoder the last
time it was moved.
When working in RELATIVE mode the encoder will send these values to the selected CC:
Clockwise rotation slow: 1
Clockwise rotation mid: 2
Clockwise rotation mid/fast: 4
Clockwise rotation fast: 6
Clockwise rotation extremely fast: 8
Counter-Clockwise rotation slow: 127
Counter-Clockwise rotation mid: 126
Counter-Clockwise rotation mid/fast: 124
Counter-Clockwise rotation fast: 123
Counter-Clockwise rotation extremely fast: 121
This will allow the host application to browse long lists of elements easily. It also allows for compatibility with
applications that already uses this quasi-standard system.