IK Multimedia AmpliTube X-SPACE, Руководство пользователя

Страница: 25 / 49

AmpliTube X-SPACE
Reverb Models
25
SPRING
This is a customizable spring reverb model, which emulates the vintage spring modules typically installed on
guitar amplifiers.
Parameters
• TIME: controls the reverb tail length.
From 0.2 s to 4 s.
• PRE-DELAY: controls the pre-delay amount.
From 0 ms to 1000 ms.
• COLOR: controls the frequency response of the reverb. At minimum the reverb gets darker, at maximum
the reverb gets brighter. Set in the middle the reverb is flat.
From -10 dB to +10 dB.
• MOD: controls the amount of modulation of the reverb.
From 0% to 100%.
• MIX: controls the balance of dry and wet signal. At 0% the signal is fully dry, while at 100% the signal is
fully wet. At around 85% the dry and wet signal have the same level.
From 0% to 100%.
• HPF: controls the cut-off frequency of the high-pass filter.
From 22 Hz to 1000 Hz.
• MOD RATE: controls the rate of the reverb modulation.
From 0.1 Hz to 7 Hz.
• HI DAMP: controls the dampness of the high-frequency diffusion.
From 0% to 100%.
• WIDTH: controls the stereo spread of the reverb.
From 0% to 100%.
• X-MODE: engages the most possible tail length.
ON or OFF.