57
ES
2.5 Sustitución y regulación de algunas piezas
¡ADVERTENCIA !
La sustitución de piezas y la regulación de las mismas están consideradas como
operaciones de mantenimiento extraordinario por lo que deben ser realizadas por un
instalador autorizado.
Antes de emprender cualquier operación de reparación o de mantenimiento se debe
desconectar el interruptor general para suspender la alimentación eléctrica del aparato.
Cerrar también los grifos de alimentación del agua.
Desmontaje de la puerta
Lampada horno
Resistencia
Ventilador horno
Goma
Las charnelas
Destornillarel casquete de protección
La resistencia se quita destornillando del interno de la camera los tornillos que la bloquean, las conec-
Una vez quitada la parte detras (el retro), del interno del horno, quitar los soporte rejilla y la protección
A mano sacar la goma de su lugar y sustituirla con aquela nueva sin la herramienta.
tore de las charnelas
a la lampada. Después de haber sostituido la lampada, remontar la cobertura de protección
ciones eléctricas son acercables de la parte detrás una vez quitada la espalda.
ventola. Destornil
la tuerca central, evental tambien los tornillos del lateral en el rotor del motor , par
lar
liberar el ventilador, deshilar esta última y destornillar los tornillos del suporto del motor.
Se levanta la puerta para el esterno cumpliendo pués los dos movimientos ilustrados
Para remontar la puerta enhebrar las charnelas en sus acanaladuras correctas. Antes de cerrar la puerta
que son necesários para enganchar las dos charnelas.
no olvidar de quitar los dos gancho móviles
cumplir estas operaciones tomar los fiancos de la puerta en proximidad de las charnelas.
(A)
(A - Fig. 6)
(A).
son dotadas a esta finalidad de dos palancas moviles
cuando la puerta es completamente abierta,las bloquean.
(B)
(B)
(Fig. 5).
que enganchadas a los sec-
que sobresale internamente al horno y pues acercarse
(C)
,
Para
A
C
B
A
Figura 5
Figura 6
Содержание GIERRE BRIO INOX FACILE
Страница 64: ...64 904 01002 02 Cod LIB904 01002...