LNU sensor : Installation & programming
Installation Guide
K0J00016-EN-A02
IJINUS
–
25 ZA de Kervidanou 3
–
29300 MELLAC
–
FRANCE
-
22
- If the sim card id locked, please enter your code (if any) and press the
Inactive
button (that will turn green, and
become
Active
) and
Program the pin code
button.
- Enter
your
APN code and press the
Program APN
button.
A message will confirm the success for each operations.
By default the parameters are set to send the data to our server as we propose a
web platform V2.ijitrack.com
with
different services to manage them. So
if you choose this option, you don’t have to change the FTP Username
.
At this stage you can run a sending test by pressing the
Force data retrieval
button and check on v2.ijitrack.com, in your
account, if the sensors data appears. Off course if your account is already created. Please ask otherwise our customer
service to do so for you. You should also write the
Rfid product number
on the label of the sensor, the
address of the
installation
, you will need them later to set up the sensor on our web platform.
The
modem diagnostic
button available on the modem configuration allows a better diagnostic of the GPRS / 3G
reception by doing multiple measurements.
If you use the advanced mode, you also do continuous modem measurements on a longer period. These options are
practical to know on what side of the manhole to place the antenna before drilling everywhere in the concrete under
the cover plate and inserting it.
