Access point AP2-LAN
User Guide
CUG00029-EN-A01
IJINUS - 25 ZA de Kervidanou 3, 29300 MELLAC
–
France : +33 2 98 09 03 30
–
Customer Service: +33 2 98 09 03 32 /
3
1
Introduction
This device is a radio access point used to transfers data into remote sensors nearby via a LAN connection. A
serial to ethernet interface is embedded in the device. We provide to our clients a command list or a software
library, to drive the access point. They are able to manage it with their own software and paired the sensors
(temperature recorders, loggers, sensors).
2
Connection to the internal serial access point using the LAN network
The AP2-LAN radio access point contains an Ijinus radio board (T2004) and a Moxa NE-4120s RS-232
Ethernet interface. The moxa board allows RS232 communication through a LAN Network. A COM port will
be created and will be used for serial link operations.
- Install the Moxa Network Enabler Administrator software
It can be
downloaded
here :
https://www.moxa.com/Moxa/media/PDIM/S100000224/moxa-ne-4100-series-network-enabler-
administrator-utility-v2.11.zip
This tool allows the discovery of the NE4120s on the network and its configuration.
- Set the NE-4200s has shown below :
Serial setting: 115200bps
–
N-8-1
–
No flow control
