manualshive.com logo in svg

Iiyama ProLite X2481HS, Руководство пользователя

Поделиться
Скачать
Iiyama ProLite X2481HS Скачать руководство пользователя страница 15

ENGLISH

  BEFORE YOU OPERATE THE MONITOR  11  

CONNECTING YOUR MONITOR : ProLite XB2481HS

  

Ensure that both the computer and the monitor are switched off.

  Connect the computer to the monitor with the signal cable.
  Connect the monitor to the audio equipment with the Audio Cable for computer when using the 

audio features.

  Connect the Power Cable to the monitor first and then to the power source.

   Turn on your monitor and computer.

[Example of Connection]

<Back>

NOTE

 The signal cables used for connecting the computer and monitor may vary with the type of 

computer used. An incorrect connection may cause serious damage to both the monitor 
and the computer. The cable supplied with the monitor is for a standard connector. If a 

special cable is required please contact your local iiyama dealer or regional iiyama office.

 For connection to Macintosh computers, contact your local iiyama dealer or regional 

iiyama office for a suitable adaptor.

 Make sure you tighten the finger screws at each end of the signal cable.

 The Class I pluggable equipment Type A must be connected to protective earth.

 The socket-outlet shall be installed near the equipment and shall be easily accessible.

 Excessive sound pressure from ear-/headphones can cause hearing damage/hearing 

loss.

[ Collect Cables ]

Put the cables through the Cable Hole to bundle them.

* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result 

of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you 

wish to connect the monitor via the VGA input.

DVI-D Cable (Accessory)

HDMI Cable (Not Included)

Computer

VGA Cable (Not Included)*

Audio Cable (Accessory)

AV Equipment etc.

Power Cable

(Accessory)

Содержание ProLite X2481HS




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды