Iiyama ProLite TE6568MIS, Руководство пользователя

Страница: 21 / 48

ENGLISH
BEFORE YOU OPERATE THE MONITOR 17
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the Touch USB Cable.
Connect the Power Cable to the monitor first and then to the power supply.
Turn on your monitor (Main Power Switch and Power Switch) and computer.

The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama office.

For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.

Make sure you tighten the finger screws at each end of the Signal Cable.

When Touch USB cable connected than wait for 5 seconds and the touch function is
ready to go. It can be activated by pen, finger or any other pointer.

Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
[Example of Connection]
<Back>
NOTE
Computer
AV Equipment
VGA Cable (Accessory)
HDMI Cable (Accessory)
Power Cable
(Accessory)
Touch USB Cable
(Accessory)
Audio Cable (Not Included)
DisplayPort Cable (Accessory)