background image

ENGLISH

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky 
areas as it may cause 

fi

 re, electric shock or damage. You should also avoid areas where the sun 

shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such that children may not pull 
the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause 

fi

 re. 

To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet 
will be blocked and the monitor may overheat if the stand is removed. This may cause 

fi

 re or damage. 

Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also 
cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable 
is disconnected. If you do not disconnect them, it may cause 

fi

 re or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents. 

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself 
as this may cause 

fi

 re or electric shock.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the AC adapter, the power cable or signal cable, always pull it by the plug. Never pull on 
the cable itself as this may cause 

fi

 re or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage 
your computer.

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. 
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) 
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is 
recommended as looking at the screen continuously can cause eye strain.

OTHERS

FOR YOUR SAFETY     2

Содержание ProLite E2472HD



























Отзывы: