ENGLISH
8 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama Vision Master has been preset at the factory with the signal
timings listed on page 13 in
PRESET MODES. If an incorrect picture appears during the operation,
adjust the image by following the procedure below to get the desired picture.
For example, to adjust the vertical position, select
(V-Center)
on the Main Menu by using the +/– Buttons.
B
The On Screen Display disappears several seconds after you stop pressing the buttons while
performing an adjustment. Any changes are automatically saved in the memory when the On
Screen Display
disappears. Turning off the power should be avoided while using the Menu.
n
n
NOTE
An adjustment scale will turn red when you press the Menu Button.
U s e t h e + / – B u t t o n s t o a d j u s t t h e v e r t i c a l p o s i t i o n . S e e
A D J U S T M E N T M E N U C O N T E N T S o n n e x t p a g e f o r f u r t h e r
information.
C
(
Adjustments for Size, Position, Pincushion, Trapezoid, Pin Balance, Parallelogram and Moire are
saved for each signal timing. Except for these adjustments, all other adjustments such as Contrast,
Brightness, Color and Rotation have only one setting which applies to all signal timings.
Main Menu appears on the screen when you press the Menu Button.
70
V: 85Hz
H: 68.8KHz
V-Center
Adjustment icon
Adjustment menu
presently selected
The line shows the
p r o g r e s s o f t h e
adjustment being
made.
9300
6500
