9
English
LIGHTING AND EXTINGUISHING YOUR KAASA PRODUCT
The burner must always be filled up to the top before Kaasa is lit. The product should
be lit immediately after the burner has been filled. If for some reason Kaasa does not
light, place the extinguishing lid in place and wait for approximately 10 minutes before
trying to light it again.
Kaasa is lit using the lighter provided. Dip the tip of the lighter in the fuel in the burner
and light it next to the product. Then bring the burning flame close to the burner plate
in the centre (see figure 8). When lighting and extinguishing your Kaasa product, make
sure that no part of your body or your clothing is immediately above the burner.
The ethanol that has evaporated from the surface of the fuel will ignite and instantly
burst into flame. The fuel will initially burn with a very small flame but this will grow after
a few minutes as your Kaasa product heats up. Once the container is empty of fuel,
Kaasa will go out by itself. Kaasa will burn for about 4–6 hours.
During use, the product may make a boiling noise. It is supposed to do this and it is
completely normal. At the start there may also be a slight smell from the fuel.
The flame can be extinguished at any time using the extinguishing lid provided
by placing the lid over the flame (see figure 9). Do not use water or other liquid to
extinguish the flame.
Figure 8. Lighting.
Kaasa_manual_2.indd 9
5.5.2011 10:53:41
Содержание Kaasa
Страница 44: ...Kaasa_manual_2 indd 44 5 5 2011 10 53 48 ...