iiNet 300N Wireless Extender, Быстрое руководство по установке

Страница: 13 / 32

iiNet 300N Wireless Repeater - Quick Installation Guide 11
a. On the front of the Extender is a WPS button. Press and hold this button for two seconds
and release.
CAUTION: If you press the WPS button for longer than five seconds,
it may reset to factory settings.
b. Within two minutes of pressing the WPS button on your Extender, press the WPS button
on your modem for two seconds then release.
c. Wait for up to two minutes while the modem and the wireless extender talk to each other
and exchange their security settings.
d. After a couple of minutes check that the WPS status light on the Extender has come
on and stays on. This means the WPS connection is successful. This light will remain
illuminated and eventually the orange ‘signal’ light comes on.
e. If the WPS status light flashes fast, there is an error. Wait until the WPS status light goes
off, and repeat Step 3 until the status light comes on and remains stable.
When the connection is complete, the following status lights will show:
Signal amber light remains steady
WLAN light flashes
Power light is steady