Operation
2017-03-31
37
6.2.3
Further DDC settings
If there are special requirements, DDC information can be imported or
exported at the device.
Therefore, please connect the device to a computer via mini USB cable.
1. Connect the power supply to the CPU Switch.
2. Connect the CPU Switch to a computer via mini USB cable.
The CPU Switch is now available as a flash drive at the computer with
the serial number of the respective device.
Export of DDC Information
3. Now you can use the DDC files "DDC-MON.BIN" of the monitor and
"DDC-DEV.BIN" of the CPU Switch by copying them to a local data
storage device.
To open the binary file, you have to install a suitable software. Therefore
contact your dialer.
Import of DDC Information
4. Copy special DDC information as a binary file to the flash drive of the
CPU Switch.
The existing DDC information in the file "DDC-EDID.BIN" will be
overwritten and is now available exclusively for the active port.
Pos: 24 /806-IHSE/Betrieb/Parallelbetrieb/484-xx @ 12\mod_1410274574479_6.doc @ 149746 @ 2 @ 1
6.3
Shared Operation
CPU Units with a redundant connector for interconnect cables offer the
possibility for a competing control by two connected CON Units.
Taking over control is performed using a keyboard and/or mouse. The
release timer function determines the release time of the input devices at
one of the CON Units after that control can be taken over from the second
CON Unit.
In order to configure a redundant CPU Unit for the operation with two
competing CON Units, proceed as follows:
1. Connect a redundant CPU Unit to any source (computer, CPU) by
using a mini USB connection.
2. Open the file "Config.txt" that is located on the appearing flash drive
of the extender.