Configuration
2017-03-31
19
Direct Control
The following table contains the keyboard commands for opening and
closing the Command Mode and for direct control of various converter
functions.
Function
Keyboard Command
Activate Command Mode (default) 2x <Left Shift> (or 'Hot Key'), <v>
Exit Command Mode
<Left Shift> + <Esc>
Configure video settings
automatically (only with VGA /
RGB / EGA input)
2x <Left Shift>, <v>, <a>
Switch to port 1
2x <Left Shift>, <v>, <1>, <Enter>
Switch to port 2
2x <Left Shift>, <v>, <2>, <Enter>
Switch to port 3
2x <Left Shift>, <v>, <3>, <Enter>
Switch to port 4
2x <Left Shift>, <v>, <4>, <Enter>
Switch to port 5
2x <Left Shift>, <v>, <5>, <Enter>
Switch to port 6
2x <Left Shift>, <v>, <6>, <Enter>
Switch to port 7
2x <Left Shift>, <v>, <7>, <Enter>
Switch to port 8
2x <Left Shift>, <v>, <8>, <Enter>
OSD Control
The following table contains the keyboard commands for entering and
exiting the OSD and for navigation and configuration.
Function
Keyboard Command
Open OSD window
2x <Left Shift>, <v>, <o>
Close OSD window
<Esc>
Navigation down in the menu
<Cursor down>
Navigation up in the menu
<Cursor up>
Menu selection
<Enter>
Leave sub menu
<Backspace>
Change of settings in sub menus
or selection of parameter values
<Cursor right> or <Cursor left>
Pos: 20 /806-IHSE/Konfiguration/238_On-Screen-Display (OSD)/238-5v-xx @ 5\mod_1291133855468_6.doc @ 45368 @ 2343433344 @ 1
