CLEARANCE TO COMBUSTIBLES
The following clearances meet the minimum requirements for a safe
installation;
Side wall:
17” (324 mm) measured from the fireplace side
Ceiling:
6’ 8” (2,032 mm) measured from the base of the fireplace
Fireplace enclosure
:
Bottom: 0”
Side: 0” to standoff
Back: 0” to standoff
Top: Do not fill the space above the fireplace with any material
(Except the wood framing. See
Page 10, Figure 11)
Chimney:
2” (50 mm)
Mantel:
42” (1067 mm) measured from the base of the fireplace.
WCT6820WS Replacement Parts
Description
Part/Cat. No.
Blower (heat activated on/off pre-wired), UZY5
UZY5
Blower motor speed control (wall mount), VRUW
VRUW
Snap Disc, Blower
VTU
Baffle refractory (2 pieces)
PR-ISO2205
Back refractory
PR-SR2618
Right side refractory
PR-SR2619D
Left side refractory
PR-SR2619G
Bottom refractory
PR-SR2201
Front refractory, right side
PR-SR2202D
Front refractory, left side
PR-SR2202G
Door handle
PR-SR1787
Door rod and lock
PR-SR2118
Hinge Assembly, Fireplace and Door
PR-SR2395TCE
Decorative Screw Caps, Black (2)
PR-SACMEFBK
Decorative Screw Caps, Brushed Nickel (2)
PR-SACMEFBN
Ceramic glass panel
PR-SR2222-1
Secondary air tube
PR-SR2271
Cast-iron Log Retainer Supports - Grate (2)
PR-SR2324
Cast Iron Log Retainer Bar
PR-SR2323
Gasket Kit, Glass, 69” (1 x 5/16”) (steel and cast doors)
PR-SR1823H
Gasket Kit, Steel Door Frame, 73” (5/8” dia.)
PR-SR1685D
Gasket Kit, Cast Door Frame, 73” (5/8” dia.)
PR-SR1823G
Touch-up Paint, Aerosol, Black Metallic SBMB6309
H8159
Touch-up Paint, Charcoal (for hammered steel facade)
PR-P6201
Coupler, Outside Air (connects UZI to fireplace)
UZIAD
Coupler for AC Chimney (connects ACZI to fireplace)
H3274
Blower 250 CFM for central forced air kit, BISZY
BISZY
Blower variable speed control with decorative wall plate
for (BISZY), VRUW
VRUW
Thermo-disk, on/off blower control (for BISZY), VTU
VTU
Blower to flexible pipe adaptor, BISAVF
BISAVF
Backdraft damper, BISBD
BISBD
Fireplace to Flex adaptor and 2 clamps, BISAF
BISAF
WCT6820WS Metal Fab Collar and Sleeve
F4189
SPECIFICATIONS
REPLACEMENT PARTS LIST
Cat. No.
Model
F1792
WCT6820WS
Product Reference Information
Weight
300 lbs
Height
36”
Width
36”
Depth
24-1/2”
Firebox W x H x D - measured in front
22” x 11-3/4” x 12”
Chimney Weight ASHT (6” dia)
6.25 lb per linear foot
Chimney Weight AC (6” dia.)
3.25 lb per linear foot
Chimney weight S-2100+ (6” dia.)
10.8 lb per linear foot
Contact an IHP dealer to obtain any of these parts. Never use substitute
materials not approved by IHP. Use of non-approved parts can result
in poor performance and safety hazards.
Model
Emission Rate
Heat Output
EPA Estimated
Efficiency
WCT6820WS
3.7 g/hr
10,442-27,746 btu/hr
63%
24
