DSP
DIGITAL
POWER AMPLIFIER
29
/
37
Click the joint adjustment button
between list of input and output channels shown in Figure 6. 1 , and
the
following Figure 7.10 channels link interface will pop up.
Figure 7.10 Channels link interface
As shown in the figure above, the three lists from left to right are divided into channel list, group list, and parameter list:
The channel list has listed all the channels that can be tuned together. After selecting the corresponding channel, click
the Add button
to move to the group list.
There are already 2 groups in the group list, directly select the corresponding group. If you add a channel to the channel
list, it will be directly divided into the selected group. If you want to remove the channel you want to remove, click Add
and press the remove button
below the button. It can be removed to the channel list.
The parameter list is the parameters that can be adjusted jointly in the grouping list. After checking, it means that when
several channels in the same group adjust the parameters, other channels will make the same adjustment at the same
time.
The device list is on the left of software homepage shown in Figure 6.1, shown in Figure 7.11 Device List below:
