CHARGING YOUR iPhone OR iPod
While the dock accommodates most cases, you may need to remove
your case for proper docking.
Gently dock your iPhone or iPod into the flexible Lightning dock located
on the top of the unit. While your iPhone/iPod is docked in the unit and
the unit is connected to AC power, it recharges (until fully charged).
Note:
Please make sure your iPhone/iPod is properly docked into the unit.
Failure to do so may damage your iPhone/iPod.
Charging Devices Via the USB Port
A 1 Amp USB port is located on the back of the unit for charging devices
while the unit is connected to AC power. Connect one end of a compatible
USB cable (not included) into the standard USB port on the unit and the
other end into the device you wish to charge. Some devices require higher
amperage USB charging ports. Monitor the charging status of your
device. If the device does not charge, you will need to use the charger
that came with your device.
LISTENING TO YOUR iPhone/iPod
While the dock accommodates most cases, you may need to remove
your case for proper docking.
1. Dock your already playing iPhone/iPod. The unit will automatically
turn on and you will hear the music playing from your iPhone/iPod.
The iPhone/iPod Icon will appear at the right side of the display,
indicating iPhone/iPod playing mode.
2. Press the or
Buttons
on the unit to adjust the system volume.
Note:
If the volume is too low on the iPhone/iPod, the unit may not detect
that the iPhone/iPod is in play mode. Press the
Button
to play it. Press
again as needed to pause and resume play.
3 Press the
+
or
–
Buttons
to go to the next or previous track (hold to scan
backwards or forwards within a track).
4. Press the
Power Button
to turn off the unit. You can also turn the
unit off by undocking a playing device.
Note:
Press the
Mode Button
to cycle from Dock to FM radio to AUX
modes.
7
