USING THE RADIO IN OTHER COUNTRIES
Different regions of the world use different FM radio frequency steps and
ranges. You will need to select the one that matches the standards in your
region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is
USA; if you live in the US, you may skip this section.
1.
While unit is OFF, press and hold the
Mode Button
for about 10 seconds
until the region flashes in the display and a beep sounds.
2.
Press
the
+
or
–
Buttons
as needed to set the display to your region: USA,
EU (Europe), JPN (Japan), AUS (Australia), or CHN (China).
3.
Press and release the
Mode Button
(or no button within 10 seconds) to
exit the radio frequency setting mode. Two beeps will confirm radio
frequency setting.
LISTENING TO AUX DEVICES
1. Connect a standard audio cable with 3.5mm plug to the headphone or
line-out jack on your AUX device and the other end to the AUX IN jack
located on the back of the iPL8XH.
2. Press and release the
Power Button
to turn on the unit, then press and
release the
Mode Button
as needed to cycle through Dock, FM radio and
AUX modes.
3. When AUX mode is selected, turn on your AUX device and use its controls
to play, pause and navigate audio tracks. Adjust the volume on your AUX
device to maximum output.
4. Press the or
Button
on the unit to adjust the system volume. Press
the
Button
to mute aux audio, and again to unmute.
5. Press and release the
Power Button
to turn off the unit when through
listening. Remember to turn off your AUX device, too.
9
