background image

4

Using the iP90

Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)

1. Once an alarm is armed, the lower part of the display will show the alarm time. If more then one alarm is armed, the earliest alarm 

time will show.

2.  To review the alarm time, press an alarm button once. The related alarm time will show on the lower part of the display.
3.  During alarm review, press the alarm button once to toggle it on or off. If the alarm is armed, the related alarm icon will light up.

Resetting the Alarm to Come on the Next Day

1.  When the alarm is sounding, press the

      Button

 to stop alarm and reset it to come on the next set day. For example, if alarm is set 

for 5 days and you press the alarm reset on Friday, the alarm will come on again on Monday, not Saturday.

Snooze Operation

1.  Press and hold the 

Snooze/Dimmer Button

 for a few seconds until the snooze time flashes. Press the 

or

 - Button

 to set the snooze 

timer from 1 to 29 minutes.

2. Press the 

Snooze/Dimmer Button

 after an alarm sounds. The alarm will be silenced for the set snooze duration time then sound 

again. Snooze can be pressed several times during the 1 hour alarm cycle.

Sure Alarm

The iP90 has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of a power failure.

Charging your iPhone/Pod

Note:

 Please make sure you are using the correct insert for your iPhone/iPod and that it is properly docked into the iP90. Failure to do 

so may damage your iPhone/iPod.
1. While an iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). 

Listening to iPhone/iPod

1. Dock the already playing iPhone/iPod in Dock. The iP90 will automatically turn on and you will hear the music playing from your 

iPhone/iPod.

 

Note:

 If the playing song/music loudness is too low on the iPod itself, the iP90 may not detect iPod is in play mode. Press the  

     Button

 

to play it. 

2. When an iPhone/iPod is docked and in standby mode, press the 

      Button

 to play it. The lower part of the display will showing “iPod” 

of iPod playing mode.

4. Press the 

     Button

 again to pause play; press again to resume it.

5.  Press the 

or

 - Button

 to skip to the next or previous track on your iPhone/iPod. Press and hold the 

or

 - Button

 to search within a 

track.

6. Press the      or      to adjust the system volume. 
7. Press the 

EQ Button

 to select and press the 

or

 - Button

 to set Treble, Bass,3D Sound on/off and Left/Right Balance. 

8. To turn off the unit, press the     

 Button

. An iPhone/iPod will continue charging while docked.

Listening to Radio

Setting up Antenna

Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
For USA user, snap AM antenna cable into 

AM Loop Antenna Socket

 on back of unit. Move antenna 12” away from unit for best reception. 

Tuning and Playing the Radio

1. Press the 

Radio Button

 as needed to turn on iP90 and cycle through FM radio, AM radio and Line-in modes.

2.  When the desired FM or AM mode is selected, press the 

or

 - Button

 to tune the radio to a desired station. The current radio frequency 

appears in the lower right of the display.  Press and hold the 

or

 - Button

 to scan for the next clear station.

3. 

To memorize a station as a preset,

 use the 

+

 or 

– Buttons

 to tune to the first station you wish to memorize. When the desired station 

appears in the display, press and hold the 

Preset 1-2 button

 until PRE 1 begins flashing in the display. Press again to alternately 

switch between Preset 1 and Preset 2 if desired, then release the button. After 5 seconds the PRE 1 or PRE 2 indicator disappears 
and your station is saved in Preset Memory 1 or 2. Repeat this procedure to enter stations in Preset Memories 3 through 6. You may 
then press the 

Radio Button

 to change bands and memorize up to 6 additional stations.

4. 

To access a preset station

, press the desired 

Preset Button

 once (for odd number presets) or twice (for even number presets).

5. Press the      or     

Button 

to adjust the system volume. 

6. Press the 

EQ Button

 to select and press the 

or

 - Button

 to set Treble, Bass,3D Sound on/off and Left/Right Balance. 

7. To turn off the unit, press the 

     Button

. An iPhone/iPod will continue charging while docked.

Содержание iP90














Отзывы: