background image

A Consumer Guide to Product Safety

8

When used in the directed manner, this unit has been designed and manufactured to assure your personal safety. However, 

improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully 

before installation and use. Keep these instructions handy for future reference. Take special note, and adhere to all warnings 

on the unit and in the instruction and service manual.

1. 

Water and Moisture

 - The unit should not be used near water. For example, near a bathtub, washbowl, kitchen sink, 

laundry tub, in a wet basement, or near a swimming pool, etc.

2. 

Ventilation

 - The unit should be situated so that its location or position does not interfere with its proper ventilation.  For 

example, it should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed 

in a built-in installation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings.

3. 

Heat

 - The unit should be situated away from heat source such as radiators, heat register, stoves, or other appliances 

(including amplifiers) that produce heat.

4. 

Power Sources

 - The unit should be connected to a power supply only of the type described in the operating instructions 

or as marked on the appliance.

5. 

Power Cord Protection

 – Power supply cord should be routed so that they are not likely to be walked on or pinched 

by items placed upon or against them. It is always best to have a clear area from where the cord exits the unit to where 

it is plugged into an AC outlet.

6. 

Cleaning

 - The unit should be cleaned only as recommended by the manufacturer.

7.  Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure 

through openings.

8. 

Attachments

 – Do not use attachments not recommended by the product manufacturer.

9.  Lightning and Power Surge Protection – Unplug the unit from the wall outlet and disconnect the antenna or cable system 

during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the 

product due to lightning and power-line surges.

10. 

Overloading

 – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a 

risk of fire or electric shock.

11. 

Damage Requiring Service

 - The appliance should be serviced by qualified service personnel when:

 

A.  The power-supply cord or plug has been damaged.

 

B.  Objects have fallen into or liquid has been spilled into the enclosure.

 

C.  The unit has been exposed to rain.

 

D.  The unit has been dropped or the enclosure damaged.

 

E.  The unit exhibits a marked change in performance or does not operate normally.

12. 

Antenna

 – Do not connect an external antenna to the unit (other than that provided).

13. 

Periods of Nonuse

 – If the unit is to be left unused for an extended period of time, such as a month or longer, the power 

cord should be unplugged and take out batteries from the unit to prevent damage or corrosion.

14. 

Servicing

 - The user should not attempt to service the unit beyond that described in the user’s operating instructions. All 

other servicing should be referred to qualified service personnel.

 Questions? Visit www.ihomeaudio.com

or call 1-800-288-2792 Toll Free 

 

P12

Содержание iP40















Отзывы: