iHome iHRV4, Руководство пользователя

Страница: 8 / 17

1:
Make sure your mobile device is connected to Wi-Fi
• Make sure that the Wi-Fi network is not 5G (the app only supports 2.4G network)
• The name & password of the Wi-Fi network cannot contain any special characters
i H O M E C L E A N A P P - W I - F I C O N N E C T I O N 6
5:
Go to Wi-Fi settings on your device and select “Autovac Juno”
6:
Re-open the iHome Clean App & wait for the connection to complete
2:
Open the iHome Clean App, select “Add device” and select Juno
4:
Select your 2.4G Wi-Fi network and enter the password
3:
Press & hold Home button for 5 seconds to enter network config
mode until the Wi-Fi indicator flashes.
NOTE:
Ensure that you have a strong
Wi-Fi signal in the location of your
setup/charging base.