Quick Start: Connections
1
NOTE: If the insert for your iPod isn’t listed, please visit an Apple store or www.ihomeaudio.com
to purchase the proper insert.
iPod Touch
3rd Gen nano
insert 13
3rd Gen nano
thin iPod with video (30 GB)
Insert 9
iPod with video (60,80 GB)
Insert 10
thin (30 GB) iPod with video
thin (80GB) iPod classic
thick (60, 80 GB) iPod with video
thick (160 GB) iPod classic
iPod Touch
insert 14
For this iPod
Use this insert
3:inserts
2:power
Attach the AC adaptor cable to
the jack on the back of the main
unit and plug the other end into a
working wall socket.
4:iPod
Insert iPod into dock with
proper insert (iPod must
not be in a skin or case).
iPod will charge while
docked.
Press the Power button
on the iH64 then press
play/pause button on your
iPod to play the iPod.
5:batteries
For portable operation,
remove the battery
compartment door on the
bottom of the main unit
and insert 4 AAA batteries
(match + and - polarity to
diagram in compartment).
Replace door. Will not
charge iPod when
operating on batteries.
1:connections
Important: Turn off iH64 before
connecting or disconncting speakers!
1. Power off iH64.
2. Connect the right speaker to the
speaker jack on the back of main unit.
3. Connect the left speaker to the speaker
jack on the back of right speaker.
Select the dock insert for your
iPod model from the table below
and place insert in dock.
Never dock an iPod without an
insert in place.
