Setting up the Unit
to Operate on Power
For easy access to the DC jack, make sure slide
cover is closed.
1. Connect the included AC adaptor to the
DC Jack on the back of the unit.
2. Connect the plug to a working outlet.
Setting up the Unit
to Operate on Batteries
The unit operates on 4 AA batteries for
portable use. When the sound becomes weak
or distorted, it’s time to replace the batteries
with fresh ones.
1. Turn the unit over and slide open the battery
compartment door located on the bottom of
the unit.
2. Insert 4 AA batteries as shown, making
sure to match the polarity (+ or -) to the
diagram inside the battery compartment.
3. Close the battery compartment.
NOTE: When the unit is connected to a
power source, it will charge a docked iPad
iPhone or iPod and/or an iOS device
connected to the USB port. It will not charge
while operating on batteries. USB port will
NOT charge iPad models.
iHome+Apps do
not work while unit is operating on batter-
ies.
3
Make sure to dispose of batteries
according to local regulations.
Aux
in
DC 12V
2.7A
RESETRES
ET
TESTTE
ST
